How to Troubleshoot and also Fix an Electric Water Heater
How to Troubleshoot and also Fix an Electric Water Heater
Blog Article
The writer is making several good points on the subject of No Hot Water — Water Heater Repair overall in this content down the page.
Several modern-day houses utilize an electric water heater for their heating unit, due to its ease as well as ease of use. Nonetheless, similar to any other electric home appliances, problems may arise with its use, all of a sudden. It can be truly frustrating to awaken to a cool shower as opposed to a warm one or having your bath with water that isn't hot adequate or even too warm. Whatever the situation may be, hot water heater issues can be rather nerve-racking. Fortunately, we have actually made a checklist of feasible services to your hot water heater concerns. There are a number of aspects that might cause much of these issues, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for security. Whatever the issue is, getting it repaired should not present too much of a concern if you comply with these actions:
Inspect Your Power Supply:
As basic as this might appear, it is very essential. Without appropriate power, your hot water heater will certainly not function. So the first thing to do when your water instantly stops working is to confirm that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the issue, just transform it on and off once again. Change any damaged or worn-out fuse. Evaluate the device with power after these adjustments to see if it's currently functioning.
Check the Heating Element in the Hot Water Heater:
If it's not a power trouble, then attempt checking out your burner if it is still working. Check each of your burner to ensure the issue isn't with any one of them. If any of them is damaged, change that part and afterwards check whether the warm water is back on.
Check Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to check the temperature setups on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open up the access panel as well as press the red switch for temperature reset over the thermostat. This need to help heat up the water. Transform the circuit breaker back on as well as examine if the problem has been settled.
Call A Professional:
If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't working, you might require to speak to an expert plumber for an expert point of view. The trouble with your heater could be that the hot and cold taps have been changed or it might be undersized for the quantity of warm water required in your home. Whatever the situation may be, a specialist plumber would help resolve the issue.
Verdict
Hot water heater troubles are not always major. A number of them result from small issues like a blown fuse or damaged heating element. Replacing the defective components must suffice. Nonetheless, if you are still not able to address the trouble, give a call to your local plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an enthusiastic person who reads about Hot Water Heater Repair, I assumed sharing that excerpt was worth the trouble. Sharing is good. You won't know, you will be helping someone out. I am grateful for your time. Please come visit our site back soon.
Source
Report this page